Metal building & shop pads
The big one in NWA: pads for steel shops, barndominiums, and equipment buildings. Poured flat and level to your building package's specs, with thickened edges where the structure bears.
Monolithic Slabs · Garage Floors · Shop Pads
Northwest Arkansas issued more than 5,600 new home permits in 2025, and half the acreage outside town seems to be getting a shop or a metal building. Every one of those buildings starts with the same thing: a flat, level, properly reinforced slab. NWA Concrete Pros pours monolithic slabs, garage floors, and building pads across Washington and Benton counties.
Free on-site estimates across Washington and Benton counties.
What we pour
The big one in NWA: pads for steel shops, barndominiums, and equipment buildings. Poured flat and level to your building package's specs, with thickened edges where the structure bears.
Attached and detached garage slabs, poured as part of new construction or as a standalone project, with the slope and finish a working garage floor needs.
Slab and footing poured in a single pass for homes, additions, and outbuildings. One pour, no cold joint between footing and floor, and faster ground-to-framing timelines.
Smaller pads done with the same discipline: storage buildings, generator and HVAC pads, hot tub bases, and RV parking pads that will not rut or settle like gravel does.
Our pour spec
A slab's job is carrying weight on ground that wants to move. Northwest Arkansas subgrade is chert-heavy and uneven, with mixed clay that swells and shrinks, so we excavate to stable material, compact a gravel base, and reinforce with a #4 rebar grid rather than light mesh. Standard slabs pour at 4 inches; shops that will see lifts, loaded trucks, RVs, or equipment go to 6 inches.
Everything is in the written quote before you sign: dimensions, thickness, base, reinforcement, and finish. We call 811 locates before digging, and because Arkansas requires a state contractor license for residential work over $2,000, your project is documented properly from the start. If your building manufacturer has a slab spec sheet, bring it to the estimate and we will pour to it.
Straight numbers
Slabs fall in the standard Arkansas installed flatwork range of $8–$14 per square foot, with size, access, and site prep deciding where your project lands.
Going from 4 inches to 6 inches for heavy loads adds about $1.15–$1.54 per square foot. A rebar grid adds $0.97–$2.19 per square foot over an unreinforced pour, and it is the cheapest insurance on the whole project.
Most shop pads need a driveway or apron in front of the doors. Pouring both in one project is cheaper than two separate mobilizations. See concrete driveways.
Per-foot ranges, material costs, and every common adder are published in the Northwest Arkansas concrete cost guide.
Slab questions
Four inches handles cars, light trucks, and general shop use. Go to 6 inches if the slab will carry a two-post lift, a loaded work truck, an RV, or heavy equipment. The upgrade is roughly $1.15–$1.54 per square foot, far cheaper than repairing a cracked 4-inch slab later.
The footing and the slab are poured in one continuous pass instead of two separate pours. It is the standard approach for many homes, garages, and outbuildings in Arkansas, and it removes the joint where water and movement cause trouble.
Because Ozark ground is rocky, uneven, and mixed with clay. A slab poured on unprepared subgrade settles unevenly, and 30 to 40 freeze-thaw cycles a winter widen every crack. Excavation, compaction, and a gravel base are what make a slab stay flat.
Yes. Metal building packages come with foundation requirements for thickness, edge depth, and anchor placement. Share the spec sheet at the estimate and the written quote will be built around it.
Keep exploring
Service area
Tell us about the project and we will come measure it and give you a written quote. No obligation.
Thanks, we got it. We will call you back shortly to schedule your estimate.